Resources · November 2026
How to choose 800, 1200, 1500, or 2000 W
A practical way to pick an air-cooled handheld laser welder from the joint you weld every week.
Buyers shop this category by watts. The watt figure is a class, not a promise that every 1500 W cabinet welds 4 mm the same way. Inside a class, the laser source, the gun, the fiber, and the parameter library still change. LaserCompact names the class first, then fixes those items on the quote.
Start from the weekly joint
Ignore the thickest coupon you might weld once a year. Write down the material and thickness that pay the wages. If that joint is 1–2 mm stainless, LC-800 or LC-1200 is the shortlist. If it is 3 mm stainless every day, start at LC-1500. If it is 5 mm, start at LC-2000 and ask for a coupon before you believe a single-pass claim.
Step up for these, not for prestige
- Aluminum, because it reflects and conducts heat. Add about one class versus the same thickness in stainless.
- A real gap. Wobble helps a small mismatch. It does not fill a joint that should have been fixtured.
- Galvanized stock. The weld may be possible and the fume is a separate problem. Price extraction with the machine.
- A hot shop or long beads at full power. Air cooling has a ceiling. The quote should say what happens above a normal shop temperature.
- Copper. Treat LC-2000 as the start of a trial, not the end of a specification.
When air-cooled is the wrong tool
Structural plate, a qualified procedure on thick sections, all-day copper, or a robot that never puts the gun down are outside this category. A water-cooled handheld, a different joint, or a fixed welding cell may be the honest answer. Ask. A selection desk that only sells 2000 W air-cooled machines is not selecting.
What the quote must lock
- Output class and the laser source name, if you need a named source.
- Gun model and whether a cleaning or cutting nozzle is actually included.
- Fiber length. Five metres is the default. Eight or ten is an option, not a surprise.
- Wire sizes and whether the feeder is dual-drive.
- Plug, voltage, and current. A 110–120 V shop needs that sentence in writing.
- Spare lenses, nozzles, and liners in the crate.
- The document pack for your country.