Air-cooled handheld · 2000 W class
LC-2000
The flagship air-cooled handheld. It is still not a water-cooled plate welder. Thick stock and copper start with a coupon.
Who it is for
- Thicker stainless
- Aluminum up to the mid millimetres
- Shops that refuse a chiller
Above this class, ask about a water-cooled handheld or a different joint design. We will say so.
In the crate
- Cabinet, gun, and the fiber length on the quote
- Wire feeder and a starter liner set
- Nozzles and protective windows
- Ground clamp
- English quick-start and a parameter sheet
- Export crate
Eyewear is specified to the wavelength on the label. Cleaning or cutting nozzles are included only when the quote says the head accepts them.
Technical parameters
| Laser power | 2000 W class |
|---|---|
| Wavelength | 1080 nm class fiber |
| Working mode | Continuous and modulated |
| Cooling | Air — no water circuit. Leave clearance at the vents. |
| Fiber length | 5 m standard, 8 or 10 m optional |
| Welding head | Wobble handheld gun. Cleaning nozzle is an option on the quote, not a default. |
| Wobble width | Up to about 5 mm |
| Wire feeder | 0.8–1.6 mm, and 2.0 mm only when the feeder on the quote allows it |
| Weldable materials | Stainless, carbon steel, galvanized, aluminum, brass, copper by sample |
| Recommended thickness | Stainless about 0.5–5.0 mm single-pass guide |
| Process gas | Matched to the material on the parameter sheet |
| Power supply | 220–240 V single phase on the standard build. A 110–120 V shop needs a quoted transformer. |
| Chassis mass | 35–55 kg class |
| Envelope | Still a movable cabinet, not a forklift machine |
| Duty guidance | Confirm hot-climate duty before a production promise. |
Material and thickness
| Material | Single-pass guide |
|---|---|
| Stainless steel | 0.5–5.0 mm guide |
| Carbon steel | 0.5–5.0 mm guide |
| Galvanized steel | 0.5–4.0 mm |
| Aluminum | 0.5–4.0 mm guide |
| Brass | Sample past 2 mm |
| Copper | Coupon required |
Thickness figures are selection guides for a sound joint, clean surface, and the gas named on the parameter sheet. They are not a weld procedure. The quotation states the configuration, and a coupon confirms an edge case.
Ask for LC-2000 against your joint.
Include voltage and the delivery country so the first reply can be a quote, not a second round of questions.